########################################################################
#
# Ots Hardware Mapping Language (OHML) Source File
#
# Hardware      : Hercules DJ Console 4-Mx DJ MIDI Hardware Controller
# File Name     : (Ots) Hercules DJ Console 4-Mx.ohm
# Last Updated  : 19-August-2012
# OtsAV Version : 1.90.0
#
# Copyright 1996-2012 Ots Corporation
#
# IMPORTANT NOTE: This is an original file from Ots Labs. If you wish to
# make edits, it is recommended that you copy the contents of this file
# to a new file first. Should you fail to do this, your changes may be
# lost when Ots software updates are installed on your computer. If you
# need to obtain the original version of this file at a later stage,
# visit http://www.OtsAV.com
#
########################################################################



# ******* Declare variables *******


# Arguments: variable name, initial value, maximum value

!var[$deck_a_playing,0,1] # 1 = playing
!var[$deck_b_playing,0,1]
!var[$deck_a_loaded,0,1] # 1 = loaded
!var[$deck_b_loaded,0,1]
!var[$deck_a_jog_mode,1,1] # 0 = bending, 1 = scratching
!var[$deck_b_jog_mode,1,1]
!var[$deck_a_jog_button,0,1] # 1 = down (pressed)
!var[$deck_b_jog_button,0,1]
!var[$deck_a_frame_search,0,1] # 1 = in frame search mode
!var[$deck_b_frame_search,0,1]
!var[$deck_a_search_spin_counter,0,16] # for dividing (by 15) jog
!var[$deck_b_search_spin_counter,0,16] # pulses when frame searching
!var[$deck_a_search_rate,0,2] # frame search speed via jog
!var[$deck_b_search_rate,0,2]
!var[$deck_a_scratch,0,1] # 1 = currently scratching
!var[$deck_b_scratch,0,1]
!var[$deck_a_bend,0,21] # non-zero = currently bending
!var[$deck_b_bend,0,21]
!var[$deck_a_bend_down,0,1] # 1 = bend down
!var[$deck_b_bend_down,0,1]
!var[$deck_a_bend_up,0,1] # 1 = bend up
!var[$deck_b_bend_up,0,1]
!var[$deck_a_scratch_state,0,2] # tracks jog wheel state for scratching
!var[$deck_b_scratch_state,0,2]
!var[$deck_a_bend_state,0,1] # tracks jog wheel state for bending
!var[$deck_b_bend_state,0,1]
!var[$deck_a_slider_index,0,1] # 0 = tempo, 1 = pitch
!var[$deck_b_slider_index,0,1]
!var[$deck_a_shift,0,1] # shift A button state
!var[$deck_b_shift,0,1] # shift B button state
!var[$global_shift,0,1] # global shift state
!var[$abm_active,0,1] # tracks abm active state
!var[$playlist_down_button_count,0,7] # deck a playlist down button held counter
!var[$playlist_up_button_count,0,7] # deck a playlist up button held counter
!var[$autodj_on,0,1] # tracks autodj enabled state
!var[$video_master,0,1] # tracks video master deck
!var[$deck_a_loop1_state,0,2] # deck a loop1 state
!var[$deck_b_loop1_state,0,2] # deck b loop1 state
!var[$deck_a_loop1_entered,0,1] # deck a loop1 entered state
!var[$deck_b_loop1_entered,0,1] # deck b loop1 entered state
!var[$deck_a_loop2_state,0,2] # deck a loop2 state
!var[$deck_b_loop2_state,0,2] # deck b loop2 state
!var[$deck_a_loop2_entered,0,1] # deck a loop2 entered state
!var[$deck_b_loop2_entered,0,1] # deck b loop2 entered state



# ******* Declare subroutines *******


!sub[@deck_a_try_bend] # this sub is used purely to gain
!sub[@deck_b_try_bend] # use of another conditional
!sub[@deck_a_try_scratch]
!sub[@deck_b_try_scratch]
!sub[@deck_a_try_scratch2]
!sub[@deck_b_try_scratch2]
!sub[@deck_a_jog_val_bend]	# important to use sub for midi.velval-based
!sub[@deck_b_jog_val_bend]	# controls which call more than one command
							# in order to be efficient (CPU resources)
!sub[@deck_a_jog_val_scratch]
!sub[@deck_b_jog_val_scratch]
!sub[@deck_a_cue_no_shift]
!sub[@deck_b_cue_no_shift]
!sub[@deck_a_slider_val] # new value from slider
!sub[@deck_b_slider_val]
!sub[@deck_a_slider_val_tempo]
!sub[@deck_b_slider_val_tempo]
!sub[@deck_a_slider_val_pitch]
!sub[@deck_b_slider_val_pitch]
!sub[@deck_a_playlist_loadnext] # load next item from playlist if
!sub[@deck_b_playlist_loadnext] # deck is not currently playing
!sub[@deck_a_prescratch_playing]
!sub[@deck_b_prescratch_playing]
!sub[@playlist_down_pressed]
!sub[@playlist_down_released]
!sub[@playlist_up_pressed]
!sub[@playlist_up_released]
!sub[@deck_a_try_loop1_press]
!sub[@deck_b_try_loop1_press]
!sub[@deck_a_loop1_state0]
!sub[@deck_b_loop1_state0]
!sub[@deck_a_loop1_state1]
!sub[@deck_b_loop1_state1]
!sub[@deck_a_try_loop2_press]
!sub[@deck_b_try_loop2_press]
!sub[@deck_a_loop2_state0]
!sub[@deck_b_loop2_state0]
!sub[@deck_a_loop2_state1]
!sub[@deck_b_loop2_state1]
!sub[@deck_a_try_length_press]
!sub[@deck_b_try_length_press]



# ******* Declare LEDs/blink assets *******


# Arguments: blink handle name, "M", midi off code, midi on code

!blink[~deck_a_key1_led,M,0x90:0x01:0x00,0x90:0x01:0x7F]
!blink[~deck_a_key2_led,M,0x90:0x02:0x00,0x90:0x02:0x7F]
!blink[~deck_a_key3_led,M,0x90:0x03:0x00,0x90:0x03:0x7F]
!blink[~deck_a_key4_led,M,0x90:0x04:0x00,0x90:0x04:0x7F]
!blink[~deck_a_key5_led,M,0x90:0x05:0x00,0x90:0x05:0x7F]
!blink[~deck_a_key6_led,M,0x90:0x06:0x00,0x90:0x06:0x7F]
!blink[~deck_a_key1_shifted_led,M,0x90:0x07:0x00,0x90:0x07:0x7F]
!blink[~deck_a_key2_shifted_led,M,0x90:0x08:0x00,0x90:0x08:0x7F]
!blink[~deck_a_key3_shifted_led,M,0x90:0x09:0x00,0x90:0x09:0x7F]
!blink[~deck_a_key4_shifted_led,M,0x90:0x0A:0x00,0x90:0x0A:0x7F]
!blink[~deck_a_key5_shifted_led,M,0x90:0x0B:0x00,0x90:0x0B:0x7F]
!blink[~deck_a_key6_shifted_led,M,0x90:0x0C:0x00,0x90:0x0C:0x7F]
!blink[~deck_a_cue_led,M,0x90:0x0D:0x00,0x90:0x0D:0x7F]
!blink[~deck_a_playpause_led,M,0x90:0x0E:0x00,0x90:0x0E:0x7F]
!blink[~deck_a_cueselect_led,M,0x90:0x0F:0x00,0x90:0x0F:0x7F]
!blink[~deck_a_stop_led,M,0x90:0x10:0x00,0x90:0x10:0x7F]
!blink[~deck_a_sync_led,M,0x90:0x11:0x00,0x90:0x11:0x7F]
!blink[~deck_a_pitchreset_led,M,0x90:0x15:0x00,0x90:0x15:0x7F]
!blink[~deck_a_source_led,M,0x90:0x16:0x00,0x90:0x16:0x7F]
!blink[~deck_a_kill_high_led,M,0x90:0x17:0x00,0x90:0x17:0x7F]
!blink[~deck_a_kill_mid_led,M,0x90:0x18:0x00,0x90:0x18:0x7F]
!blink[~deck_a_kill_bass_led,M,0x90:0x19:0x00,0x90:0x19:0x7F]
!blink[~deck_a_jogtouch_led,M,0x90:0x1A:0x00,0x90:0x1A:0x7F]
!blink[~deck_b_key1_led,M,0x90:0x21:0x00,0x90:0x21:0x7F]
!blink[~deck_b_key2_led,M,0x90:0x22:0x00,0x90:0x22:0x7F]
!blink[~deck_b_key3_led,M,0x90:0x23:0x00,0x90:0x23:0x7F]
!blink[~deck_b_key4_led,M,0x90:0x24:0x00,0x90:0x24:0x7F]
!blink[~deck_b_key5_led,M,0x90:0x25:0x00,0x90:0x25:0x7F]
!blink[~deck_b_key6_led,M,0x90:0x26:0x00,0x90:0x26:0x7F]
!blink[~deck_b_key1_shifted_led,M,0x90:0x27:0x00,0x90:0x27:0x7F]
!blink[~deck_b_key2_shifted_led,M,0x90:0x28:0x00,0x90:0x28:0x7F]
!blink[~deck_b_key3_shifted_led,M,0x90:0x29:0x00,0x90:0x29:0x7F]
!blink[~deck_b_key4_shifted_led,M,0x90:0x2A:0x00,0x90:0x2A:0x7F]
!blink[~deck_b_key5_shifted_led,M,0x90:0x2B:0x00,0x90:0x2B:0x7F]
!blink[~deck_b_key6_shifted_led,M,0x90:0x2C:0x00,0x90:0x2C:0x7F]
!blink[~deck_b_cue_led,M,0x90:0x2D:0x00,0x90:0x2D:0x7F]
!blink[~deck_b_playpause_led,M,0x90:0x2E:0x00,0x90:0x2E:0x7F]
!blink[~deck_b_cueselect_led,M,0x90:0x2F:0x00,0x90:0x2F:0x7F]
!blink[~deck_b_stop_led,M,0x90:0x30:0x00,0x90:0x30:0x7F]
!blink[~deck_b_sync_led,M,0x90:0x31:0x00,0x90:0x31:0x7F]
!blink[~deck_b_pitchreset_led,M,0x90:0x35:0x00,0x90:0x35:0x7F]
!blink[~deck_b_source_led,M,0x90:0x36:0x00,0x90:0x36:0x7F]
!blink[~deck_b_kill_high_led,M,0x90:0x37:0x00,0x90:0x37:0x7F]
!blink[~deck_b_kill_mid_led,M,0x90:0x38:0x00,0x90:0x38:0x7F]
!blink[~deck_b_kill_bass_led,M,0x90:0x39:0x00,0x90:0x39:0x7F]
!blink[~deck_b_jogtouch_led,M,0x90:0x3A:0x00,0x90:0x3A:0x7F]
!blink[~autodj_led,M,0x90:0x3C:0x00,0x90:0x3C:0x7F]
!blink[~scratch_led,M,0x90:0x3D:0x00,0x90:0x3D:0x7F]
!blink[~files_led,M,0x90:0x3E:0x00,0x90:0x3E:0x7F]
!blink[~folders_led,M,0x90:0x3F:0x00,0x90:0x3F:0x7F]



# ******* Initialisation *******


# Called by OHM subsystem at startup.
# Place any code here that is important to maintain state at launch

sub[@_init] {
# turn off all hardware-blinked LEDs which we don't use
	midiOut(0x90:0x41:0x00) # deck A key 1 - 6
	midiOut(0x90:0x42:0x00)
	midiOut(0x90:0x43:0x00)
	midiOut(0x90:0x44:0x00)
	midiOut(0x90:0x45:0x00)
	midiOut(0x90:0x46:0x00)
	midiOut(0x90:0x47:0x00) # deck A key shifted 1 - 6
	midiOut(0x90:0x48:0x00)
	midiOut(0x90:0x49:0x00)
	midiOut(0x90:0x4A:0x00)
	midiOut(0x90:0x4B:0x00)
	midiOut(0x90:0x4C:0x00)
	midiOut(0x90:0x4D:0x00) # deck A cue
	midiOut(0x90:0x4E:0x00) # deck A playpause
	midiOut(0x90:0x4F:0x00) # deck A cueselect
	midiOut(0x90:0x50:0x00) # deck A stop
	midiOut(0x90:0x51:0x00) # deck A sync
	midiOut(0x90:0x52:0x00) # deck A deck
	midiOut(0x90:0x55:0x00) # deck A pitchreset
	midiOut(0x90:0x56:0x00) # deck A source
	midiOut(0x90:0x57:0x00) # deck A kill high, med, bass
	midiOut(0x90:0x58:0x00)
	midiOut(0x90:0x59:0x00)
	midiOut(0x90:0x5A:0x00) # deck A jogtouch
	midiOut(0x90:0x61:0x00) # deck B key 1 - 6
	midiOut(0x90:0x62:0x00)
	midiOut(0x90:0x63:0x00)
	midiOut(0x90:0x64:0x00)
	midiOut(0x90:0x65:0x00)
	midiOut(0x90:0x66:0x00)
	midiOut(0x90:0x67:0x00) # deck B key shifted 1 - 6
	midiOut(0x90:0x68:0x00)
	midiOut(0x90:0x69:0x00)
	midiOut(0x90:0x6A:0x00)
	midiOut(0x90:0x6B:0x00)
	midiOut(0x90:0x6C:0x00)
	midiOut(0x90:0x6D:0x00) # deck B cue
	midiOut(0x90:0x6E:0x00) # deck B playpause
	midiOut(0x90:0x6F:0x00) # deck B cueselect
	midiOut(0x90:0x70:0x00) # deck B stop
	midiOut(0x90:0x71:0x00) # deck B sync
	midiOut(0x90:0x72:0x00) # deck B deck
	midiOut(0x90:0x75:0x00) # deck B pitchreset
	midiOut(0x90:0x76:0x00) # deck B source
	midiOut(0x90:0x77:0x00) # deck B kill high, med, bass
	midiOut(0x90:0x78:0x00)
	midiOut(0x90:0x79:0x00)
	midiOut(0x90:0x7A:0x00) # deck B jogtouch
	midiOut(0x90:0x7C:0x00) # autodj
	midiOut(0x90:0x7D:0x00) # scratch
	midiOut(0x90:0x7E:0x00) # files
	midiOut(0x90:0x7F:0x00) # folders
# turn off LEDs	
	BlinkSet(~deck_a_key1_led,0)
	BlinkSet(~deck_a_key2_led,0)
	BlinkSet(~deck_a_key3_led,0)
	BlinkSet(~deck_a_key4_led,0)
	BlinkSet(~deck_a_key5_led,0)
	BlinkSet(~deck_a_key6_led,0)
	BlinkSet(~deck_a_key1_shifted_led,0)
	BlinkSet(~deck_a_key2_shifted_led,0)
	BlinkSet(~deck_a_key3_shifted_led,0)
	BlinkSet(~deck_a_key4_shifted_led,0)
	BlinkSet(~deck_a_key5_shifted_led,0)
	BlinkSet(~deck_a_key6_shifted_led,0)
	BlinkSet(~deck_a_cue_led,0)
	BlinkSet(~deck_a_playpause_led,0)
	BlinkSet(~deck_a_cueselect_led,0)
	BlinkSet(~deck_a_stop_led,0)
	BlinkSet(~deck_a_sync_led,0)
	BlinkSet(~deck_a_pitchreset_led,0)
	BlinkSet(~deck_a_source_led,0)
	BlinkSet(~deck_a_kill_high_led,0)
	BlinkSet(~deck_a_kill_mid_led,0)
	BlinkSet(~deck_a_kill_bass_led,0)
	BlinkSet(~deck_a_jogtouch_led,0)
	BlinkSet(~deck_b_key1_led,0)
	BlinkSet(~deck_b_key2_led,0)
	BlinkSet(~deck_b_key3_led,0)
	BlinkSet(~deck_b_key4_led,0)
	BlinkSet(~deck_b_key5_led,0)
	BlinkSet(~deck_b_key6_led,0)
	BlinkSet(~deck_b_key1_shifted_led,0)
	BlinkSet(~deck_b_key2_shifted_led,0)
	BlinkSet(~deck_b_key3_shifted_led,0)
	BlinkSet(~deck_b_key4_shifted_led,0)
	BlinkSet(~deck_b_key5_shifted_led,0)
	BlinkSet(~deck_b_key6_shifted_led,0)
	BlinkSet(~deck_b_cue_led,0)
	BlinkSet(~deck_b_playpause_led,0)
	BlinkSet(~deck_b_cueselect_led,0)
	BlinkSet(~deck_b_stop_led,0)
	BlinkSet(~deck_b_sync_led,0)
	BlinkSet(~deck_b_pitchreset_led,0)
	BlinkSet(~deck_b_source_led,0)
	BlinkSet(~deck_b_kill_high_led,0)
	BlinkSet(~deck_b_kill_mid_led,0)
	BlinkSet(~deck_b_kill_bass_led,0)
	BlinkSet(~deck_b_jogtouch_led,0)
	BlinkSet(~autodj_led,0)
	BlinkSet(~scratch_led,0)
	BlinkSet(~files_led,0)
	BlinkSet(~folders_led,0)
# turn on tempo and scratch jog mode leds which default to on	
	BlinkSet(~scratch_led,1)
	BlinkSet(~deck_a_key6_led,1)
	BlinkSet(~deck_b_key6_led,1)
# set controller modes
	midiOut(0xB0:0x78:0x00) # set deck mode: Basic Control
	midiOut(0xB0:0x72:0x00) # set shift A: off
	midiOut(0xB0:0x73:0x00) # set shift B: off
	midiOut(0xB0:0x79:0x00) # set jog sensitivity: Most
	midiOut(0xB0:0x7E:0x00) # set crossfader curve: BeatMix (default)
# get current OtsAV state
	avStateRequest() # will generate appropriate Load, Play, etc events
# get state of controller faders
	midiOut(0xB0:0x7F:0x7F) # request update of all fader positions
# activate video master functionality
	avVideoMaster(E)
# enable playlist navigation	
	avPlaylistNav(E)
}



# ******* Respond to OtsAV/other events *******


########################################################
####### Deck A: Load/Cue/Play-Pause/Frame Search/etc
av[Load,A,E] { # Deck A Load (entered Loaded state)
	VarSet($deck_a_loaded,1) # save state for our own use
	BlinkSet(~deck_a_playpause_led,3) # medium blink
}
av[Load,A,D] { # Deck A Eject (left Loaded state)
	VarSet($deck_a_loaded,0) # clear state
	BlinkSet(~deck_a_playpause_led,0) # off
}
av[Play,A,E] { # Deck A Play (entered Playing state)
	VarSet($deck_a_playing,1) # save state for our own use
	BlinkSet(~deck_a_playpause_led,1) # on
}
av[Play,A,D] { # Deck A Stop (left Playing state)
	VarSet($deck_a_playing,0) # clear state
	BlinkSet(~deck_a_playpause_led,3) # medium blink
}
av[Cued,A,E] { # Deck A entered Cued state
	BlinkSet(~deck_a_cue_led,1) # on
}
av[Cued,A,D] { # Deck A left Cued state
	BlinkSet(~deck_a_cue_led,0) # off
}
av[PreMix,A,E] { # Deck A entered Pre-mix state
	BlinkSet(~deck_a_playpause_led,4) # fast blink
}
av[PreMix,A,D] { # Deck A left Pre-mix state
	BlinkSet(~deck_a_playpause_led,3) # medium blink
}
av[FrameSearch,A,E] { # Deck A entered Frame Search mode
	VarSet($deck_a_frame_search,1) # save state for our own use
	VarSet($deck_a_search_spin_counter,7)
	BlinkSet(~deck_a_cue_led,4) # fast blink
}
av[FrameSearch,A,D] { # Deck A left Frame Search mode
	VarSet($deck_a_frame_search,0) # clear state
	BlinkSet(~deck_a_cue_led,0) # off
}

####### Deck B: Load/Cue/Play-Pause/Frame Search/etc
av[Load,B,E] { # Deck B Load (entered Loaded state)
	VarSet($deck_b_loaded,1) # save state for our own use
	BlinkSet(~deck_b_playpause_led,3) # medium blink
}
av[Load,B,D] { # Deck B Eject (left Loaded state)
	VarSet($deck_b_loaded,0) # clear state
	BlinkSet(~deck_b_playpause_led,0) # off
}
av[Play,B,E] { # Deck B Play (entered Playing state)
	VarSet($deck_b_playing,1) # save state for our own use
	BlinkSet(~deck_b_playpause_led,1) # on
}
av[Play,B,D] { # Deck B Stop (left Playing state)
	VarSet($deck_b_playing,0) # clear state
	BlinkSet(~deck_b_playpause_led,3) # medium blink
}
av[Cued,B,E] { # Deck B entered Cued state
	BlinkSet(~deck_b_cue_led,1) # on
}
av[Cued,B,D] { # Deck B left Cued state
	BlinkSet(~deck_b_cue_led,0) # off
}
av[PreMix,B,E] { # Deck B entered Pre-mix state
	BlinkSet(~deck_b_playpause_led,4) # fast blink
}
av[PreMix,B,D] { # Deck B left Pre-mix state
	BlinkSet(~deck_b_playpause_led,3) # medium blink
}
av[FrameSearch,B,E] { # Deck B entered Frame Search mode
	VarSet($deck_b_frame_search,1) # save state for our own use
	VarSet($deck_b_search_spin_counter,7)
	BlinkSet(~deck_b_cue_led,4) # fast blink
}
av[FrameSearch,B,D] { # Deck B left Frame Search mode
	VarSet($deck_b_frame_search,0) # clear state
	BlinkSet(~deck_b_cue_led,0) # off
}


########################################################
####### Deck A: Primary transport controls
midi.trigger[0x90:0x0E:0x7F] { # Deck A Play/Pause button down
	($global_shift=0)	avPlayPause(A,E)
	($global_shift=1)	avPlay(A)
}
midi.trigger[0x90:0x0E:0x00] { # Deck A Play/Pause button up
	avPlayPause(A,D)
}
midi.trigger[0x90:0x0D:0x7F] { # Deck A Cue button down
	($global_shift=0)	SubCall(@deck_a_cue_no_shift)
	($global_shift=1)	avCueSet(A)
}
sub[@deck_a_cue_no_shift] { # Deck A Cue button down without shift
	($deck_a_scratch=0)	avCue(A,E)
	($deck_a_scratch=1)	avCueSet(A)
}	
midi.trigger[0x90:0x0D:0x00] { # Deck A Cue button up
	avCue(A,D)
}
midi.trigger[0x90:0x1F:0x7F] { # Deck A Frame Search (back) button down
	avFrameSearch(A,-1)
}
midi.trigger[0x90:0x20:0x7F] { # Deck A Frame Search (forward) button down
	avFrameSearch(A,+1)
}
midi.relval[0xB0:0x01,0x40,0xC0,0x80]	($deck_a_frame_search=1)	VarDec($deck_a_search_spin_counter)
midi.relval[0xB0:0x01,0x00,0xC0,0x00]	($deck_a_frame_search=1)	VarInc($deck_a_search_spin_counter)
midi.relval[0xB0:0x24,0x40,0xC0,0x80]	($deck_a_frame_search=1)	VarDec($deck_a_search_spin_counter)
midi.relval[0xB0:0x24,0x00,0xC0,0x00]	($deck_a_frame_search=1)	VarInc($deck_a_search_spin_counter)
var.set[$deck_a_search_spin_counter=0] {
	($deck_a_search_rate=0)	avFrameSearch(A,-1)
	($deck_a_search_rate=1)	avFrameSearch(A,-5)
	($deck_a_search_rate=2)	avFrameSearch(A,-20)
	VarInc($deck_a_search_rate)
	VarSet($deck_a_search_spin_counter,15)
}
var.set[$deck_a_search_spin_counter=16] {
	($deck_a_search_rate=0)	avFrameSearch(A,+1)
	($deck_a_search_rate=1)	avFrameSearch(A,+5)
	($deck_a_search_rate=2)	avFrameSearch(A,+20)
	VarInc($deck_a_search_rate)
	VarSet($deck_a_search_spin_counter,1)
}
timer.tick	VarDec($deck_a_search_rate)

####### Deck B: Primary transport controls
midi.trigger[0x90:0x2E:0x7F] { # Deck B Play/Pause button down
	($global_shift=0)	avPlayPause(B,E)
	($global_shift=1)	avPlay(B)
}
midi.trigger[0x90:0x2E:0x00] { # Deck B Play/Pause button up
	avPlayPause(B,D)
}
midi.trigger[0x90:0x2D:0x7F] { # Deck B Cue button down
	($global_shift=0)	SubCall(@deck_b_cue_no_shift)
	($global_shift=1)	avCueSet(B)
}
sub[@deck_b_cue_no_shift] { # Deck B Cue button down without shift
	($deck_b_scratch=0)	avCue(B,E)
	($deck_b_scratch=1)	avCueSet(B)
}
midi.trigger[0x90:0x2D:0x00] { # Deck B Cue button up
	avCue(B,D)
}
midi.trigger[0x90:0x45:0x7F] { # Deck B Frame Search (back) button down
	avFrameSearch(B,-1)
}
midi.trigger[0x90:0x46:0x7F] { # Deck B Frame Search (forward) button down
	avFrameSearch(B,+1)
}
midi.relval[0xB0:0x09,0x40,0xC0,0x80]	($deck_b_frame_search=1)	VarDec($deck_b_search_spin_counter)
midi.relval[0xB0:0x09,0x00,0xC0,0x00]	($deck_b_frame_search=1)	VarInc($deck_b_search_spin_counter)
midi.relval[0xB0:0x25,0x40,0xC0,0x80]	($deck_b_frame_search=1)	VarDec($deck_b_search_spin_counter)
midi.relval[0xB0:0x25,0x00,0xC0,0x00]	($deck_b_frame_search=1)	VarInc($deck_b_search_spin_counter)
var.set[$deck_b_search_spin_counter=0] {
	($deck_b_search_rate=0)	avFrameSearch(B,-1)
	($deck_b_search_rate=1)	avFrameSearch(B,-5)
	($deck_b_search_rate=2)	avFrameSearch(B,-20)
	VarInc($deck_b_search_rate)
	VarSet($deck_b_search_spin_counter,15)
}
var.set[$deck_b_search_spin_counter=16] {
	($deck_b_search_rate=0)	avFrameSearch(B,+1)
	($deck_b_search_rate=1)	avFrameSearch(B,+5)
	($deck_b_search_rate=2)	avFrameSearch(B,+20)
	VarInc($deck_b_search_rate)
	VarSet($deck_b_search_spin_counter,1)
}
timer.tick	VarDec($deck_b_search_rate)


########################################################
####### Deck A: Jog mode/Bending/Scratching
var.set[$deck_a_jog_mode=0]	{
	($deck_a_scratch=1)	VarSet($deck_a_scratch,0) # cancel scratching if enabled
}
var.set[$deck_a_jog_mode=1]	{
	($deck_a_bend=1)	VarSet($deck_a_bend,0) # cancel bending if enabled
}
var.set[$deck_a_playing=0] { # Deck A Stop (left Playing state)
	($deck_a_bend=1)	VarSet($deck_a_bend,0) # cancel bending if enabled
	($deck_a_bend_down=1)	VarSet($deck_a_bend_down,0) # cancel bend down if enabled
	($deck_a_bend_up=1)	VarSet($deck_a_bend_up,0) # cancel bend up if enabled
	($deck_a_scratch=1)	VarSet($deck_a_scratch,0) # cancel scratching if enabled
}
var.set[$deck_a_frame_search=1] { # Deck A entered Frame Search mode
	($deck_a_bend=1)	VarSet($deck_a_bend,0) # cancel bending if enabled
	($deck_a_scratch=1)	VarSet($deck_a_scratch,0) # cancel scratching if enabled
}
midi.trigger[0x90:0x1A:0x7F] { # Deck A Jog button down
	VarSet($deck_a_jog_button,1)
}
var.set[$deck_a_jog_button=1] {
	($deck_a_jog_mode=1)	SubCall(@deck_a_try_scratch)
}
sub[@deck_a_try_scratch]	($deck_a_playing=1)	SubCall(@deck_a_try_scratch2)
sub[@deck_a_try_scratch2] {
	($deck_a_frame_search=0)	VarSet($deck_a_scratch,1)
}
midi.trigger[0x90:0x1A:0x00] { # Deck A Jog button up
	VarSet($deck_a_jog_button,0)
}
var.set[$deck_a_jog_button=0] {
	($deck_a_scratch_state!=1)	VarSet($deck_a_scratch,0) # cancel scratching if jog inactive
}
var.set[$deck_a_scratch=1] {
	avScratch(A,E,0.0)
	BlinkSet(~deck_a_cue_led,4) # fast blink
}
var.set[$deck_a_scratch=0] {
	avScratch(A,D,0.0)
	BlinkSet(~deck_a_cue_led,0)
}
sub[@deck_a_try_bend]	($deck_a_frame_search=0)	VarSet($deck_a_bend,1)
var.set[$deck_a_bend=1] {
	($deck_a_bend_down=1)	VarSet($deck_a_bend_down,0) # cancel bend down if enabled
	($deck_a_bend_up=1)	VarSet($deck_a_bend_up,0) # cancel bend up if enabled
	avBend(A,E,0.0)
}
var.set[$deck_a_bend=0] {
	avBend(A,D,0.0)
}
midi.velval[R,0xB0:0x01,0x80,0x00,0,6.5,0.1,$deck_a_bend_state,0]	($deck_a_jog_mode=0)	SubCall(@deck_a_jog_val_bend)
midi.velval[R,0xB0:0x24,0x80,0x00,0,2.7,0.3,$deck_a_scratch_state,0]	($deck_a_jog_mode=1)	SubCall(@deck_a_jog_val_scratch)
sub[@deck_a_jog_val_bend] { # new value from jog wheel
	($deck_a_bend=1)	avBendSet(A,_)
}
var.set[$deck_a_bend_state!=0] { # jog wheel active in bending mode
	($deck_a_playing=1)	SubCall(@deck_a_try_bend)
}
var.set[$deck_a_bend_state=0] { # jog wheel inactive in bending mode
	VarSet($deck_a_bend,0) # cancel bending
}
sub[@deck_a_jog_val_scratch] { # new value from jog wheel
	($deck_a_scratch=1)	avScratchSet(A,_)
}
var.set[$deck_a_scratch_state!=1] { # jog wheel inactive in scratching mode
	($deck_a_jog_button=0)	VarSet($deck_a_scratch,0) # cancel scratching if jog button not down
}
midi.trigger[0x90:0x1D:0x7F]	($deck_a_playing=1)	VarSet($deck_a_bend_down,1)
midi.trigger[0x90:0x1D:0x00]	($deck_a_bend_down=1)	VarSet($deck_a_bend_down,0)
midi.trigger[0x90:0x1E:0x7F]	($deck_a_playing=1)	VarSet($deck_a_bend_up,1)
midi.trigger[0x90:0x1E:0x00]	($deck_a_bend_up=1)	VarSet($deck_a_bend_up,0)
var.set[$deck_a_bend_down=1] {
	($deck_a_bend=1)	VarSet($deck_a_bend,0) # cancel bending if enabled
	($deck_a_bend_up=1)	VarSet($deck_a_bend_up,0) # cancel bend up if enabled
	avBend(A,E,-0.4) # bend down at 4%
}
var.set[$deck_a_bend_down=0] {
	avBend(A,D,0.0) # cancel bend down
}
var.set[$deck_a_bend_up=1] {
	($deck_a_bend=1)	VarSet($deck_a_bend,0) # cancel bending if enabled
	($deck_a_bend_down=1)	VarSet($deck_a_bend_down,0) # cancel bend down if enabled
	avBend(A,E,+0.4) # bend up at 4%
}
var.set[$deck_a_bend_up=0] {
	avBend(A,D,0.0) # cancel bend up
}
midi.trigger[0x90:0x05:0x7F]	avZorphingModeSet(A,T)
av[ZorphingMode,A,D] {
	BlinkSet(~deck_a_key5_led,0)
}
av[ZorphingMode,A,E] {
	BlinkSet(~deck_a_key5_led,3) # medium blink
}

####### Deck B: Jog mode/Bending/Scratching
var.set[$deck_b_jog_mode=0]	{
	($deck_b_scratch=1)	VarSet($deck_b_scratch,0) # cancel scratching if enabled
}
var.set[$deck_b_jog_mode=1]	{
	($deck_b_bend=1)	VarSet($deck_b_bend,0) # cancel bending if enabled
}
var.set[$deck_b_playing=0] { # Deck B Stop (left Playing state)
	($deck_b_bend=1)	VarSet($deck_b_bend,0) # cancel bending if enabled
	($deck_b_bend_down=1)	VarSet($deck_b_bend_down,0) # cancel bend down if enabled
	($deck_b_bend_up=1)	VarSet($deck_b_bend_up,0) # cancel bend up if enabled
	($deck_b_scratch=1)	VarSet($deck_b_scratch,0) # cancel scratching if enabled
}
var.set[$deck_b_frame_search=1] { # Deck B entered Frame Search mode
	($deck_b_bend=1)	VarSet($deck_b_bend,0) # cancel bending if enabled
	($deck_b_scratch=1)	VarSet($deck_b_scratch,0) # cancel scratching if enabled
}
midi.trigger[0x90:0x3A:0x7F] { # Deck B Jog button down
	VarSet($deck_b_jog_button,1)
}
var.set[$deck_b_jog_button=1] {
	($deck_b_jog_mode=1)	SubCall(@deck_b_try_scratch)
}
sub[@deck_b_try_scratch]	($deck_b_playing=1)	SubCall(@deck_b_try_scratch2)
sub[@deck_b_try_scratch2] {
	($deck_b_frame_search=0)	VarSet($deck_b_scratch,1)
}
midi.trigger[0x90:0x3A:0x00] { # Deck B Jog button up
	VarSet($deck_b_jog_button,0)
}
var.set[$deck_b_jog_button=0] {
	($deck_b_scratch_state!=1)	VarSet($deck_b_scratch,0) # cancel scratching if jog inactive
}
var.set[$deck_b_scratch=1] {
	avScratch(B,E,0.0)
	BlinkSet(~deck_b_cue_led,4) # fast blink
}
var.set[$deck_b_scratch=0] {
	avScratch(B,D,0.0)
	BlinkSet(~deck_b_cue_led,0)
}
sub[@deck_b_try_bend]	($deck_b_frame_search=0)	VarSet($deck_b_bend,1)
var.set[$deck_b_bend=1] {
	($deck_b_bend_down=1)	VarSet($deck_b_bend_down,0) # cancel bend down if enabled
	($deck_b_bend_up=1)	VarSet($deck_b_bend_up,0) # cancel bend up if enabled
	avBend(B,E,0.0)
}
var.set[$deck_b_bend=0] {
	avBend(B,D,0.0)
}
midi.velval[R,0xB0:0x09,0x80,0x00,0,6.5,0.1,$deck_b_bend_state,0]	($deck_b_jog_mode=0)	SubCall(@deck_b_jog_val_bend)
midi.velval[R,0xB0:0x25,0x80,0x00,0,2.7,0.3,$deck_b_scratch_state,0]	($deck_b_jog_mode=1)	SubCall(@deck_b_jog_val_scratch)
sub[@deck_b_jog_val_bend] { # new value from jog wheel
	($deck_b_bend=1)	avBendSet(B,_)
}
var.set[$deck_b_bend_state!=0] { # jog wheel active in bending mode
	($deck_b_playing=1)	SubCall(@deck_b_try_bend)
}
var.set[$deck_b_bend_state=0] { # jog wheel inactive in bending mode
	VarSet($deck_b_bend,0) # cancel bending
}
sub[@deck_b_jog_val_scratch] { # new value from jog wheel
	($deck_b_scratch=1)	avScratchSet(B,_)
}
var.set[$deck_b_scratch_state!=1] { # jog wheel inactive in scratching mode
	($deck_b_jog_button=0)	VarSet($deck_b_scratch,0) # cancel scratching if jog button not down
}
midi.trigger[0x90:0x43:0x7F]	($deck_b_playing=1)	VarSet($deck_b_bend_down,1)
midi.trigger[0x90:0x43:0x00]	($deck_b_bend_down=1)	VarSet($deck_b_bend_down,0)
midi.trigger[0x90:0x44:0x7F]	($deck_b_playing=1)	VarSet($deck_b_bend_up,1)
midi.trigger[0x90:0x44:0x00]	($deck_b_bend_up=1)	VarSet($deck_b_bend_up,0)
var.set[$deck_b_bend_down=1] {
	($deck_b_bend=1)	VarSet($deck_b_bend,0) # cancel bending if enabled
	($deck_b_bend_up=1)	VarSet($deck_b_bend_up,0) # cancel bend up if enabled
	avBend(B,E,-0.4) # bend down at 4%
}
var.set[$deck_b_bend_down=0] {
	avBend(B,D,0.0) # cancel bend down
}
var.set[$deck_b_bend_up=1] {
	($deck_b_bend=1)	VarSet($deck_b_bend,0) # cancel bending if enabled
	($deck_b_bend_down=1)	VarSet($deck_b_bend_down,0) # cancel bend down if enabled
	avBend(B,E,+0.4) # bend up at 4%
}
var.set[$deck_b_bend_up=0] {
	avBend(B,D,0.0) # cancel bend up
}
midi.trigger[0x90:0x25:0x7F]	avZorphingModeSet(B,T)
av[ZorphingMode,B,D] {
	BlinkSet(~deck_b_key5_led,0)
}
av[ZorphingMode,B,E] {
	BlinkSet(~deck_b_key5_led,3) # medium blink
}


########################################################
####### Deck A: Bass/Mid/High EQ knobs
midi.absval[S,0xB0:0x08,0x00,0x40,0x7F] { # Deck A - Low EQ knob capture
	avEQGainBass(A,_) # Set Deck A Bass Level
}
midi.absval[S,0xB0:0x07,0x00,0x40,0x7F] { # Deck A - Mid EQ knob capture
	avEQGainMid(A,_) # Set Deck A Mid Level
}
midi.absval[S,0xB0:0x06,0x00,0x40,0x7F] { # Deck A - High EQ knob capture
	avEQGainHigh(A,_) # Set Deck A High Level
}

####### Deck B: Bass/Mid/High EQ knobs
midi.absval[S,0xB0:0x10,0x00,0x40,0x7F] { # Deck B - Low EQ knob capture
	avEQGainBass(B,_) # Set Deck B Bass Level
}
midi.absval[S,0xB0:0x0F,0x00,0x40,0x7F] { # Deck B - Mid EQ knob capture
	avEQGainMid(B,_) # Set Deck B Mid Level
}
midi.absval[S,0xB0:0x0E,0x00,0x40,0x7F] { # Deck B - High EQ knob capture
	avEQGainHigh(B,_) # Set Deck B High Level
}


########################################################
####### Deck A: Bass/Mid/High cut
midi.trigger[0x90:0x19:0x7F] { # Deck A Kill-Bass button down
	avEQCutBass(A,T) # Toggle Deck A Bass Cut
}
midi.trigger[0x90:0x18:0x7F] { # Deck A Kill-Mid button down
	avEQCutMid(A,T) # Toggle Deck A Mid Cut
}
midi.trigger[0x90:0x17:0x7F] { # Deck A Kill-High button down
	avEQCutHigh(A,T) # Toggle Deck A High Cut
}
av[EQCutBass,A,E] { # Deck A Bass Cut enabled
	BlinkSet(~deck_a_kill_bass_led,1)
}
av[EQCutBass,A,D] { # Deck A Bass Cut disabled
	BlinkSet(~deck_a_kill_bass_led,0)
}
av[EQCutMid,A,E] { # Deck A Mid Cut enabled
	BlinkSet(~deck_a_kill_mid_led,1)
}
av[EQCutMid,A,D] { # Deck A Mid Cut disabled
	BlinkSet(~deck_a_kill_mid_led,0)
}
av[EQCutHigh,A,E] { # Deck A High Cut enabled
	BlinkSet(~deck_a_kill_high_led,1)
}
av[EQCutHigh,A,D] { # Deck A High Cut disabled
	BlinkSet(~deck_a_kill_high_led,0)
}

####### Deck B: Bass/Mid/High cut
midi.trigger[0x90:0x39:0x7F] { # Deck B Kill-Bass button down
	avEQCutBass(B,T) # Toggle Deck B Bass Cut
}
midi.trigger[0x90:0x38:0x7F] { # Deck B Kill-Mid button down
	avEQCutMid(B,T) # Toggle Deck B Mid Cut
}
midi.trigger[0x90:0x37:0x7F] { # Deck B Kill-High button down
	avEQCutHigh(B,T) # Toggle Deck B High Cut
}
av[EQCutBass,B,E] { # Deck B Bass Cut enabled
	BlinkSet(~deck_b_kill_bass_led,1)
}
av[EQCutBass,B,D] { # Deck B Bass Cut disabled
	BlinkSet(~deck_b_kill_bass_led,0)
}
av[EQCutMid,B,E] { # Deck B Mid Cut enabled
	BlinkSet(~deck_b_kill_mid_led,1)
}
av[EQCutMid,B,D] { # Deck B Mid Cut disabled
	BlinkSet(~deck_b_kill_mid_led,0)
}
av[EQCutHigh,B,E] { # Deck B High Cut enabled
	BlinkSet(~deck_b_kill_high_led,1)
}
av[EQCutHigh,B,D] { # Deck B High Cut disabled
	BlinkSet(~deck_b_kill_high_led,0)
}


########################################################
####### Crossfader
midi.absval[S,0xB0:0x22,0x00,0x40,0x7F]	{
	avXFaderSet(_) # normal sync logic
}


########################################################
####### ABM Active
av[ABMActive,E] {
	VarSet($abm_active,1)
}
av[ABMActive,D] {
	VarSet($abm_active,0)
}
var.set[$abm_active=1] {
	BlinkSet(~scratch_led,4) # fast blink	
	BlinkSet(~autodj_led,12) # inverse fast blink
	BlinkSet(~folders_led,12) # inverse fast blink	
	BlinkSet(~files_led,4) # fast blink
}
var.set[$abm_active=0] { # leds back to off or current
	($deck_a_jog_mode=0)	BlinkSet(~scratch_led,0)
	($deck_a_jog_mode=1)	BlinkSet(~scratch_led,1)
	($autodj_on=0)	BlinkSet(~autodj_led,0)
	($autodj_on=1)	BlinkSet(~autodj_led,1)
	BlinkSet(~folders_led,0)
	BlinkSet(~files_led,0)
}
av[ABMBeat.1] {
	($abm_active=1)	BlinkSet(~scratch_led,1) # Beat 1 on
	($abm_active=1)	BlinkSet(~files_led,0) # Beat 4 off
}
av[ABMBeat.2] {
	($abm_active=1)	BlinkSet(~autodj_led,1) # Beat 2 on
	($abm_active=1)	BlinkSet(~scratch_led,0) # Beat 1 off
}
av[ABMBeat.3] {
	($abm_active=1)	BlinkSet(~folders_led,1) # Beat 3 on
	($abm_active=1)	BlinkSet(~autodj_led,0) # Beat 2 off
}
av[ABMBeat.4] {
	($abm_active=1)	BlinkSet(~files_led,1) # Beat 4 on
	($abm_active=1)	BlinkSet(~folders_led,0) # Beat 3 off
}


########################################################
####### Deck A: Shift key
midi.trigger[0x90:0x10:0x7F]	VarSet($deck_a_shift,1)
midi.trigger[0x90:0x10:0x00]	VarSet($deck_a_shift,0)

####### Deck B: Shift key
midi.trigger[0x90:0x30:0x7F]	VarSet($deck_b_shift,1)
midi.trigger[0x90:0x30:0x00]	VarSet($deck_b_shift,0)

####### Global Shift state
var.set[$deck_a_shift=1]	VarSet($global_shift,1)
var.set[$deck_a_shift=0]	($deck_b_shift=0)	VarSet($global_shift,0)
var.set[$deck_b_shift=1]	VarSet($global_shift,1)
var.set[$deck_b_shift=0]	($deck_a_shift=0)	VarSet($global_shift,0)

####### Deck A + B Shift - Mix Now
var.set[$deck_a_shift=1] {
	($deck_b_shift=1)	avNext() # Mix now 
}
var.set[$deck_b_shift=1] {
	($deck_a_shift=1)	avNext() # Mix now 
}


########################################################
####### Cue A and Cue B button functionality
midi.trigger[0x90:0x0F:0x7F]	{
	avMixer.Cue(A,T) # Toggle Deck A Mixer Cue Button
}
midi.trigger[0x90:0x2F:0x7F]	{
	avMixer.Cue(B,T) # Toggle Deck B Mixer Cue Button
}
av[Mixer.Cue,A,E] {
	BlinkSet(~deck_a_cueselect_led,1)
}
av[Mixer.Cue,B,E] {
	BlinkSet(~deck_b_cueselect_led,1)
}
av[Mixer.Cue,A,D] {
	BlinkSet(~deck_a_cueselect_led,0)
}
av[Mixer.Cue,B,D] {
	BlinkSet(~deck_b_cueselect_led,0)
}


########################################################
####### Sync A and Sync B button functionality
midi.trigger[0x90:0x11:0x7F]	{ # Sync A button down
	($deck_a_slider_index=0) avBPMMatch.Tempo(A)
	($deck_a_slider_index=1) avBPMMatch.Pitch(A)
}

midi.trigger[0x90:0x31:0x7F]	{ # Sync B button down
	($deck_b_slider_index=0) avBPMMatch.Tempo(B)
	($deck_b_slider_index=1) avBPMMatch.Pitch(B)
}


########################################################
####### Scratch/Bend Jog Mode
midi.trigger[0x90:0x3D:0x7F]	{ # Scratch button down
	VarIncWrap($deck_a_jog_mode) # Change between Scratch/Bend mode
	VarIncWrap($deck_b_jog_mode) # Change between Scratch/Bend mode
	($deck_a_jog_mode=0)	BlinkSet(~scratch_led,0) # Turn off scratch led (only one scratch led and button on this controller)
	($deck_a_jog_mode=1)	BlinkSet(~scratch_led,1) # Turn on scratch led (only one scratch led and button on this controller)
}


########################################################
####### Mixer Level Sliders / Gain Knobs
# Note: Disable knob or slider code with comment character (#) if you want to change preference

####### Level Sliders
midi.absval[S,0xB0:0x03,0x00,0x61,0x7F]	{
	($global_shift=0)	avLevelSet(A,_) # Sets Deck A level on OtsAV Mixer
	($global_shift=1)	avLevelSet(A,_,F0|F4) # bypass sync logic and snap value
}
midi.absval[S,0xB0:0x0B,0x00,0x61,0x7F]	{
	($global_shift=0)	avLevelSet(B,_) # Sets Deck B level on OtsAV Mixer
	($global_shift=1)	avLevelSet(B,_,F0|F4) # bypass sync logic and snap value
}

####### Gain Knobs
#midi.absval[S,0xB0:0x04,0x00,0x40,0x7F]	{
#	($global_shift=0)	avLevelSet(A,_) # Sets Deck A level on OtsAV Mixer
#	($global_shift=1)	avLevelSet(A,_,F0|F4) # bypass sync logic and snap value
#}
#midi.absval[S,0xB0:0x0C,0x00,0x40,0x7F]	{
#	($global_shift=0)	avLevelSet(B,_) # Sets Deck B level on OtsAV Mixer
#	($global_shift=1)	avLevelSet(B,_,F0|F4) # bypass sync logic and snap value
#}


########################################################
####### Deck A: Slider
midi.absval[S,0xB0:0x05,0x7F,0x40,0x00]	SubCall(@deck_a_slider_val)
sub[@deck_a_slider_val] { # new value from slider
	($deck_a_slider_index=0)	SubCall(@deck_a_slider_val_tempo)
	($deck_a_slider_index=1)	SubCall(@deck_a_slider_val_pitch)
}
sub[@deck_a_slider_val_tempo] { # slider pos -- tempo
	($global_shift=0)	avTempoSet(A,_) # normal sync logic
	($global_shift=1)	avTempoSet(A,_,F1) # force synced state
}
sub[@deck_a_slider_val_pitch] { # slider pos -- pitch
	($global_shift=0)	avPitchSet(A,_) # normal sync logic
	($global_shift=1)	avPitchSet(A,_,F1) # force synced state
}
midi.trigger[0x90:0x06:0x7F] { # slider mode button down (Key 6)
	VarIncWrap($deck_a_slider_index)
}
var.set[$deck_a_slider_index=0] {
	avTempoSet(A,0.0,F2|F7) # init sync with last pitch slider position
	BlinkSet(~deck_a_key6_led,1) # Tempo mode - turn light on
}
var.set[$deck_a_slider_index=1] {
	avPitchSet(A,0.0,F2|F6) # init sync with last tempo slider position
	BlinkSet(~deck_a_key6_led,0) # Pitch mode - turn light off
}
midi.trigger[0x90:0x13:0x7F] { # slider range up button
	($deck_a_slider_index=0)	avSliderRangeSet.Tempo(A,0) # Cycle Tempo range
	($deck_a_slider_index=1)	avSliderRangeSet.Pitch(A,0) # Cycle Pitch range
}
midi.trigger[0x90:0x14:0x7F] { # slider range down button
	($deck_a_slider_index=0)	avSliderRangeSet.Tempo(A,100) # Set Tempo to 100 range
	($deck_a_slider_index=1)	avSliderRangeSet.Pitch(A,100) # Set Pitch to 100 range
}
av[SliderRangeNew.Tempo,A] {
	($deck_a_slider_index=0)	avTempoSet(A,0.0,F2|F6) # init sync with last tempo slider position
}
av[SliderRangeNew.Pitch,A] {
	($deck_a_slider_index=1)	avPitchSet(A,0.0,F2|F7) # init sync with last pitch slider position
}

####### Deck B: Slider
midi.absval[S,0xB0:0x0D,0x7F,0x40,0x00]	SubCall(@deck_b_slider_val)
sub[@deck_b_slider_val] { # new value from slider
	($deck_b_slider_index=0)	SubCall(@deck_b_slider_val_tempo)
	($deck_b_slider_index=1)	SubCall(@deck_b_slider_val_pitch)
}
sub[@deck_b_slider_val_tempo] { # slider pos -- tempo
	($global_shift=0)	avTempoSet(B,_) # normal sync logic
	($global_shift=1)	avTempoSet(B,_,F1) # force synced state
}
sub[@deck_b_slider_val_pitch] { # slider pos -- pitch
	($global_shift=0)	avPitchSet(B,_) # normal sync logic
	($global_shift=1)	avPitchSet(B,_,F1) # force synced state
}
midi.trigger[0x90:0x26:0x7F] { # slider mode button down (Key 6)
	VarIncWrap($deck_b_slider_index)
}
var.set[$deck_b_slider_index=0] {
	avTempoSet(B,0.0,F2|F7) # init sync with last pitch slider position
	BlinkSet(~deck_b_key6_led,1) # Tempo mode - turn light on
}
var.set[$deck_b_slider_index=1] {
	avPitchSet(B,0.0,F2|F6) # init sync with last tempo slider position
	BlinkSet(~deck_b_key6_led,0) # Pitch mode - turn light off
}
midi.trigger[0x90:0x33:0x7F] { # slider range up button
	($deck_b_slider_index=0)	avSliderRangeSet.Tempo(B,0) # Cycle Tempo range
	($deck_b_slider_index=1)	avSliderRangeSet.Pitch(B,0) # Cycle Pitch range
}
midi.trigger[0x90:0x34:0x7F] { # slider range down button
	($deck_b_slider_index=0)	avSliderRangeSet.Tempo(B,100) # Set Tempo to 100 range
	($deck_b_slider_index=1)	avSliderRangeSet.Pitch(B,100) # Set Pitch to 100 range
}
av[SliderRangeNew.Tempo,B] {
	($deck_b_slider_index=0)	avTempoSet(B,0.0,F2|F6) # init sync with last tempo slider position
}
av[SliderRangeNew.Pitch,B] {
	($deck_b_slider_index=1)	avPitchSet(B,0.0,F2|F7) # init sync with last pitch slider position
}


########################################################
####### Auto DJ / ABM button
midi.trigger[0x90:0x3C:0x7F] {
	($global_shift=0)	avAutoDJ(T)
	($global_shift=1)	avABM(T)
}

av[AutoDJ,E] {
	VarSet($autodj_on,1)
	BlinkSet(~autodj_led,1)
}
av[AutoDJ,D] {
	VarSet($autodj_on,0)
	BlinkSet(~autodj_led,0)
}


########################################################
####### Deck A: Video Block/Master functionality
midi.trigger[0x90:0x03:0x7F]	avVideoBlock(A,T) # toggle video block (Key 3)
av[VideoBlock,A,E] {
	BlinkSet(~deck_a_key3_led,3) # medium blink
}
av[VideoBlock,A,D] {
	BlinkSet(~deck_a_key3_led,0)
}
midi.trigger[0x90:0x04:0x7F] { # Deck A Master Video (Key 4) button down
	($video_master!=0)	avVideoMasterSet(A) # set as video master
	($video_master=0)	avVideoMasterSet(B) # make other deck master
}
av[VideoMasterSet,A] {
	VarSet($video_master,0)
	BlinkSet(~deck_a_key4_led,1)
	BlinkSet(~deck_b_key4_led,0)
}

####### Deck B: Video Block/Master functionality
midi.trigger[0x90:0x23:0x7F]	avVideoBlock(B,T) # toggle video block (Key 3)
av[VideoBlock,B,E] {
	BlinkSet(~deck_b_key3_led,3) # medium blink
}
av[VideoBlock,B,D] {
	BlinkSet(~deck_b_key3_led,0)
}
midi.trigger[0x90:0x24:0x7F] { # Deck B Master Video (Key 4) button down
	($video_master!=1)	avVideoMasterSet(B) # set as video master
	($video_master=1)	avVideoMasterSet(A) # make other deck master
}
av[VideoMasterSet,B] {
	VarSet($video_master,1)
	BlinkSet(~deck_b_key4_led,1)
	BlinkSet(~deck_a_key4_led,0)
}


########################################################
####### Playlist Navigation
midi.trigger[0x90:0x3F:0x7F]	avPlaylistNav(T) # Left button pressed
midi.trigger[0x90:0x3E:0x7F]	avPlaylistNav(T) # Right button pressed
midi.trigger[0x90:0x41:0x7F]	SubCall(@playlist_down_pressed) # Down button pressed
sub[@playlist_down_pressed] {
	avPlaylistNav.Walk(+1)
	VarSet($playlist_down_button_count,1)
}
midi.trigger[0x90:0x41:0x00]	SubCall(@playlist_down_released) # Down button released
sub[@playlist_down_released]	VarSet($playlist_down_button_count,0)
midi.trigger[0x90:0x40:0x7F]	SubCall(@playlist_up_pressed) # Up button pressed
sub[@playlist_up_pressed] {
	avPlaylistNav.Walk(-1)
	VarSet($playlist_up_button_count,1)
}
midi.trigger[0x90:0x40:0x00]	SubCall(@playlist_up_released) # Up button released
sub[@playlist_up_released]	VarSet($playlist_up_button_count,0)
var.set[$playlist_down_button_count=7] { # Down button held count
	avPlaylistNav.Walk(+3)
	VarSet($playlist_down_button_count,6)
}
var.set[$playlist_up_button_count=7] { # Up button held count
	avPlaylistNav.Walk(-3)
	VarSet($playlist_up_button_count,6)
}
timer.tick	($playlist_down_button_count!=0) VarInc($playlist_down_button_count)
timer.tick	($playlist_up_button_count!=0) VarInc($playlist_up_button_count)
midi.trigger[0x90:0x4A:0x7F]	($deck_a_playing=0)	Subcall(@deck_a_playlist_loadnext)
sub[@deck_a_playlist_loadnext] { # load next item from playlist
	($global_shift=0)	avPlaylistNav.Load(A,F1) # Load selected item
	($global_shift=1)	avLoadNext(A,F1) # Load next item
}
midi.trigger[0x90:0x4B:0x7F]	($deck_b_playing=0)	Subcall(@deck_b_playlist_loadnext)
sub[@deck_b_playlist_loadnext] { # load next item from playlist
	($global_shift=0)	avPlaylistNav.Load(B,F1) # Load selected item
	($global_shift=1)	avLoadNext(B,F1) # Load next item
}
av[PlaylistNav,D] {
	avPlaylistNav(T)
}


########################################################
####### Deck A: Looping functionality
midi.trigger[0x90:0x07:0x7F]	($deck_a_loaded=1)	Subcall(@deck_a_try_loop1_press) # Loop 1 button pressed (only execute if Deck A loaded)
sub[@deck_a_try_loop1_press] { # Execute function based on current loop1 state (state 0: out of loop, 1: setting loop, 2: looping)
	($deck_a_loop2_state!=0)	avLooping.CancelAll(A,F0) # if loop2 active cancel
	($deck_a_loop2_state!=0)	VarSet($deck_a_loop2_state,0) # if loop2 active cancel and reset loop state
	($deck_a_loop1_state=0)	Subcall(@deck_a_loop1_state0)
	($deck_a_loop1_state=1)	Subcall(@deck_a_loop1_state1)
	($deck_a_loop1_state=2)	avLooping.CancelAll(A,F0) # exit loop
	($deck_a_loop1_entered=0)	VarIncWrap($deck_a_loop1_state)
	($deck_a_loop1_entered=1)	VarSet($deck_a_loop1_state,2) # set to state 2: looping
	($deck_a_loop1_entered=1)	VarSet($deck_a_loop1_entered,0) # reset loop entered variable
}
sub[@deck_a_loop1_state0] { # Execute function based on shift state
	($global_shift=0)	avLooping.MarkA.1(A) # mark loop start
	($global_shift=1)	avLooping.EnterLoop.1(A) # enter loop
	($global_shift=1)	VarSet($deck_a_loop1_entered,1)
}
sub[@deck_a_loop1_state1] { # Execute function based on shift state
	($global_shift=0)	avLooping.MarkB(A) # mark loop end
	($global_shift=1)	avLooping.MarkB(A,F0) # suppress beat-snapping
}
var.set[$deck_a_loop1_state=0] { # Loop exit state - turn LED off
	BlinkSet(~deck_a_key1_shifted_led,0)
}
var.set[$deck_a_loop1_state=1] { # Loop setting state - turn LED fast blink
	BlinkSet(~deck_a_key1_shifted_led,4)
}
var.set[$deck_a_loop1_state=2] { # Loop looping state - turn LED on
	BlinkSet(~deck_a_key1_shifted_led,1)
}
midi.trigger[0x90:0x08:0x7F]	($deck_a_loaded=1)	Subcall(@deck_a_try_loop2_press) # Loop 2 button pressed (only execute if Deck A loaded)
sub[@deck_a_try_loop2_press] { # Execute function based on current loop2 state (state 0: out of loop, 1: setting loop, 2: looping)
	($deck_a_loop1_state!=0)	avLooping.CancelAll(A,F0) # if loop1 active cancel
	($deck_a_loop1_state!=0)	VarSet($deck_a_loop1_state,0) # if loop1 active cancel and reset loop state
	($deck_a_loop2_state=0)	Subcall(@deck_a_loop2_state0)
	($deck_a_loop2_state=1)	Subcall(@deck_a_loop2_state1)
	($deck_a_loop2_state=2)	avLooping.CancelAll(A,F0) # exit loop
	($deck_a_loop2_entered=0)	VarIncWrap($deck_a_loop2_state)
	($deck_a_loop2_entered=1)	VarSet($deck_a_loop2_state,2) # set to state 2: looping
	($deck_a_loop2_entered=1)	VarSet($deck_a_loop2_entered,0) # reset loop entered variable
}
sub[@deck_a_loop2_state0] { # Execute function based on shift state
	($global_shift=0)	avLooping.MarkA.2(A) # mark loop start
	($global_shift=1)	avLooping.EnterLoop.2(A) # enter loop
	($global_shift=1)	VarSet($deck_a_loop2_entered,1)
}
sub[@deck_a_loop2_state1] { # Execute function based on shift state
	($global_shift=0)	avLooping.MarkB(A) # mark loop end
	($global_shift=1)	avLooping.MarkB(A,F0) # suppress beat-snapping
}
var.set[$deck_a_loop2_state=0] { # Loop exit state - turn LED off
	BlinkSet(~deck_a_key2_shifted_led,0)
}
var.set[$deck_a_loop2_state=1] { # Loop setting state - turn LED fast blink
	BlinkSet(~deck_a_key2_shifted_led,4)
}
var.set[$deck_a_loop2_state=2] { # Loop looping state - turn LED on
	BlinkSet(~deck_a_key2_shifted_led,1)
}
midi.trigger[0x90:0x09:0x7F] { # Loop Length button down
	($deck_a_loaded=1)	Subcall(@deck_a_try_length_press) # Loop Length button pressed (only execute if Deck A loaded)
	($deck_a_loaded=1)	BlinkSet(~deck_a_key3_shifted_led,1) # turn LED on
}
midi.trigger[0x90:0x09:0x00] { # Loop Length button up - turn LED off
	BlinkSet(~deck_a_key3_shifted_led,0)
}
sub[@deck_a_try_length_press] { # Only cancel setting loop supported in this version (Length not supported)
	($deck_a_loop1_state=1)	avLooping.CancelAll(A,F0) # cancel setting loop
	($deck_a_loop1_state=1)	VarSet($deck_a_loop1_state,0) # reset loop state
	($deck_a_loop2_state=1)	avLooping.CancelAll(A,F0) # cancel setting loop
	($deck_a_loop2_state=1)	VarSet($deck_a_loop2_state,0) # reset loop state
}
midi.trigger[0x90:0x0C:0x7F] { # Tap A button down
	avTapBPM(A) # send beat trigger for BPM detection
	($deck_a_loaded=1)	BlinkSet(~deck_a_key6_shifted_led,1) # turn LED on
}
midi.trigger[0x90:0x0C:0x00] { # Tap A button up - turn LED off
	BlinkSet(~deck_a_key6_shifted_led,0)
}
var.set[$deck_a_loaded=0] { # Deck A ejected - init looping state variables
	VarSet($deck_a_loop1_state,0)
	VarSet($deck_a_loop2_state,0)
}

####### Deck B: Looping functionality
midi.trigger[0x90:0x27:0x7F]	($deck_b_loaded=1)	Subcall(@deck_b_try_loop1_press) # Loop 1 button pressed (only execute if Deck B loaded)
sub[@deck_b_try_loop1_press] { # Execute function based on current loop1 state (state 0: out of loop, 1: setting loop, 2: looping)
	($deck_b_loop2_state!=0)	avLooping.CancelAll(B,F0) # if loop2 active cancel
	($deck_b_loop2_state!=0)	VarSet($deck_b_loop2_state,0) # if loop2 active cancel and reset loop state
	($deck_b_loop1_state=0)	Subcall(@deck_b_loop1_state0)
	($deck_b_loop1_state=1)	Subcall(@deck_b_loop1_state1)
	($deck_b_loop1_state=2)	avLooping.CancelAll(B,F0) # exit loop
	($deck_b_loop1_entered=0)	VarIncWrap($deck_b_loop1_state)
	($deck_b_loop1_entered=1)	VarSet($deck_b_loop1_state,2) # set to state 2: looping
	($deck_b_loop1_entered=1)	VarSet($deck_b_loop1_entered,0) # reset loop entered variable
}
sub[@deck_b_loop1_state0] { # Execute function based on shift state
	($global_shift=0)	avLooping.MarkA.1(B) # mark loop start
	($global_shift=1)	avLooping.EnterLoop.1(B) # enter loop
	($global_shift=1)	VarSet($deck_b_loop1_entered,1)
}
sub[@deck_b_loop1_state1] { # Execute function based on shift state
	($global_shift=0)	avLooping.MarkB(B) # mark loop end
	($global_shift=1)	avLooping.MarkB(B,F0) # suppress beat-snapping
}
var.set[$deck_b_loop1_state=0] { # Loop exit state - turn LED off
	BlinkSet(~deck_b_key1_shifted_led,0)
}
var.set[$deck_b_loop1_state=1] { # Loop setting state - turn LED fast blink
	BlinkSet(~deck_b_key1_shifted_led,4)
}
var.set[$deck_b_loop1_state=2] { # Loop looping state - turn LED on
	BlinkSet(~deck_b_key1_shifted_led,1)
}
midi.trigger[0x90:0x28:0x7F]	($deck_b_loaded=1)	Subcall(@deck_b_try_loop2_press) # Loop 2 button pressed (only execute if Deck B loaded)
sub[@deck_b_try_loop2_press] { # Execute function based on current loop2 state (state 0: out of loop, 1: setting loop, 2: looping)
	($deck_b_loop1_state!=0)	avLooping.CancelAll(B,F0) # if loop1 active cancel
	($deck_b_loop1_state!=0)	VarSet($deck_b_loop1_state,0) # if loop1 active cancel and reset loop state
	($deck_b_loop2_state=0)	Subcall(@deck_b_loop2_state0)
	($deck_b_loop2_state=1)	Subcall(@deck_b_loop2_state1)
	($deck_b_loop2_state=2)	avLooping.CancelAll(B,F0) # exit loop
	($deck_b_loop2_entered=0)	VarIncWrap($deck_b_loop2_state)
	($deck_b_loop2_entered=1)	VarSet($deck_b_loop2_state,2) # set to state 2: looping
	($deck_b_loop2_entered=1)	VarSet($deck_b_loop2_entered,0) # reset loop entered variable
}
sub[@deck_b_loop2_state0] { # Execute function based on shift state
	($global_shift=0)	avLooping.MarkA.2(B) # mark loop start
	($global_shift=1)	avLooping.EnterLoop.2(B) # enter loop
	($global_shift=1)	VarSet($deck_b_loop2_entered,1)
}
sub[@deck_b_loop2_state1] { # Execute function based on shift state
	($global_shift=0)	avLooping.MarkB(B) # mark loop end
	($global_shift=1)	avLooping.MarkB(B,F0) # suppress beat-snapping
}
var.set[$deck_b_loop2_state=0] { # Loop exit state - turn LED off
	BlinkSet(~deck_b_key2_shifted_led,0)
}
var.set[$deck_b_loop2_state=1] { # Loop setting state - turn LED fast blink
	BlinkSet(~deck_b_key2_shifted_led,4)
}
var.set[$deck_b_loop2_state=2] { # Loop looping state - turn LED on
	BlinkSet(~deck_b_key2_shifted_led,1)
}
midi.trigger[0x90:0x29:0x7F] { # Loop Length button down
	($deck_b_loaded=1)	Subcall(@deck_b_try_length_press) # Loop Length button pressed (only execute if Deck B loaded)
	($deck_b_loaded=1)	BlinkSet(~deck_b_key3_shifted_led,1) # turn LED on
}
midi.trigger[0x90:0x29:0x00] { # Loop Length button up - turn LED off
	BlinkSet(~deck_b_key3_shifted_led,0)
}
sub[@deck_b_try_length_press] { # Only cancel setting loop supported in this version (Length not supported)
	($deck_b_loop1_state=1)	avLooping.CancelAll(B,F0) # cancel setting loop
	($deck_b_loop1_state=1)	VarSet($deck_b_loop1_state,0) # reset loop state
	($deck_b_loop2_state=1)	avLooping.CancelAll(B,F0) # cancel setting loop
	($deck_b_loop2_state=1)	VarSet($deck_b_loop2_state,0) # reset loop state
}
midi.trigger[0x90:0x2C:0x7F] { # Tap B button down
	avTapBPM(B) # send beat trigger for BPM detection
	($deck_b_loaded=1)	BlinkSet(~deck_b_key6_shifted_led,1) # turn LED on
}
midi.trigger[0x90:0x2C:0x00] { # Tap B button up - turn LED off
	BlinkSet(~deck_b_key6_shifted_led,0)
}
var.set[$deck_b_loaded=0] { # Deck B ejected - init looping state variables
	VarSet($deck_b_loop1_state,0)
	VarSet($deck_b_loop2_state,0)
}